INTENSIFIER™ KANDY KONCENTRATE (KK) Use to enrich any of our Kosmic Kolor Urethane Enamel Kandys or Kustom Kolor Acrylic Lacquer Kandys. Our intensifiers reduce the number of coats required to color match an exterior finish. Works great on door jambs, under the hood and in trunk areas. Is also great for small parts, and motorcycles, when time is a factor. Can also be used with SG-100 or our lacquer clears for multi-colored artwork.
		FLAKES (F, MF, and UMF) House of Kolor flakes are the best money can buy. They are ultra-thin, easier to smooth out and have tremendous sparkle! Add them to any of our clears or Kandys for some additional flash. Available in an array of colors, and three different sizes: a standard coarse flake, a fine mini flake and an even finer ultra-mini flake.
		PEARL CONCENTRATES (DP, DR, PP) These pearl concentrates may be added to any of our acrylic lacquers or urethane enamels, or to first coats of kandys when shooting over solid color bases. They are available in paste or dry form in an array of colors. Use them to design your own one of a kind custom paint job.
		ICE™ PEARLS (IP) Ice™ Pearls glass flake pigments go beyond what traditional pearls offer in vibrance, brilliance, and sparkle–especially under sunlight conditions. Ice™Pearls can be used with any of our SHIMRIN® bases, Kandys, Klears, or Kustom bases to give a brilliant glitter effect.
		KAMELEON™ PEARLS (KPF) The color changing effect of Kameleon™ Pearls are just as dramatic as the Kameleon™ Base coats Available in four color changing pigments, they are in dry form and may be added to SG-100 Intercoat Clear or any of our acrylic lacquer or urethane clears. The pearls can make a vehicle appear to be different colors to people looking at it from different angles. Use these pearls to add an exciting flare to your artwork.
		KOSMIC-GLO (KG) So bright, you'd think somebody turned these colors on! These powdered phosphorescents soak up the light, then glow in the dark. Add spectacular effects to any graphic by adding them to automotive clear and watch your flames burn and your scallops sizzle. Depending on use and sun exposure, light fastness on some colors will be limited. The glow effect will last even if the color fades.
		STRIPING & LETTERING URETHANE ENAMELS (U) Our Striping & Lettering enamels are specially designed for striping, lettering, and airbrush artwork. They feature high pigmentation, low solids for a minimal edge, and long open time. Apply over existing finishes or topcoat for a smooth, durable finish.
		ACCELERATOR™ (AX-01) This potent curing aid is used to speed dry time in cool shops on parts that must be handled (sanded for art layouts) or recoated the same day. ACCELERATOR can be added to any of the following Kosmic Kolor products (UC-1, UFC-1, UC-35, UFC-35, UFC-19 Klears, UB and UFB Solid Colors, and UK Kandys) to speed up cure time.
		ADHERTO™ (AP-01 and AP-02) adhesion promoters To ensure proper adhesion of automotive paint to: plastics, metals, chrome, or a variety of other surfaces use our ADHERETO adhesion promoter. ADHERETO can also be used for between coat adhesion, when one paint has dried or for difficult sanding situations. Ready to spray right out of the can (no reduction required). Clear in color. Available in two formulas: AP-01 for most plastics and metals, and AP-02 for polyethylene only.
		FLATTENING AGENT™ (FA-O1) FA-01 is designed to reduce the gloss of our acrylic lacquer and polyurethane enamel topcoats and clears. FA-01 will not effect adhesion or hardness. You can vary the amount of gloss reduction (from 10% to 99%) depending on the amount of FLATTENING AGENT used. FA-01 is great for undercarriages, frames and engine parts where high gloss is not desired, but a tough, durable finish is.
		HI-HEAT BLACK (HH-04) Great for engine parts, exhaust systems, or anywhere high temperatures is a concern. Hi-heat Black is manufactured with the most technologically advanced ingredients available. It features hi-build, fast coverage, and cures to a beautiful semi-gloss jet black finish that will endure 1400°F with no flaking or discoloration. Comes ready-to-spray, requiring no reduction. Parts are dry enough to handle in one hour with no baking required.